Terrazzo tiles have become a front liner in almost all the newer building improvement projects today. Thanks to its durability, design capabilities, and low lifecycle costs, you will find it in many luxury homes either on the floor. Click here to read more about Terrazzo tiles.
Aside from homes, you will also find it in schools, restaurants, hospitals and other commercial spaces. So, if you are thinking of installing terrazzo tiles to beautify the floor of your house? Thumbs up. I would say you have good taste.
Meanwhile, since this might be your first time trying something like this, you need to know the different methods of installing terrazzo tiles. There is poured-in-place epoxy terrazzo, which is recently the favorite of several season architects and home designers. That is not for any other reason other than the fact that it offers ample design opportunities.
In case you don’t like that, cement terrazzo is your next available option. Many people like this method for its vintage appearance, so even professional architects usually suggest it for exterior use.
Are you also ready to use terrazzo tiles to create stunning magic in your home? Let’s go and learn the HOW. visit http://avaheating.com/5-unique-places-to-install-terrazzo-tiles/ to read about 5 Unique Places to Install Terrazzo Tiles.
Before we go into the nitty-gritty of installing terrazzo tiles, you need to make some preparations before you start laying the tiles. The first thing is to prepare the subfloor to make it ready for installation. After that, you would have to take some necessary measurements accurately and get your tools ready. There is more to that, but I will discuss it extensively in the forthcoming article.
I want to assume that you have done the needful, so let’s get to work.
How To Lay Terrazzo Floor Tiles
Step 1: Know the tile measurement for the edge
Before laying your terrazzo tiles on the floor, the first thing is to measure the edges accurately to make a perfect design.
Terrazzo consists of marble chips and dust with a cement binder. Sometimes, it comes as finished individual tiles and other times, as poured-in-place over a concrete slab which you will ground to achieve a polished finish. When installing terrazzo tiles, many professionals prefer to butt them up against one another to replicate the terrazzo slab look.
When you are done measuring, you will have to dry-fit the first line of full tiles right from the chalk line and extend it to the outside wall. The next step is to outline the tiles and ensure that you mark the last row, which you will need to cut to fit.
To cut your terrazzo tiles accurately, you can use one of the most effective techniques called ‘jump scrubbing’. Using this method, you find it easy to overlay the following tiles and scribe a straight line down the terrazzo tile to get the right cut.
Step 2: Cut the tiles’ edges to fit
After determining the correct measurement for the edge, the best thing to do is to cut any terrazzo tile that needs cutting to fit.
You can use a diamond wet saw or tile cutter to do this job perfectly. A wet saw will give you a smooth and clean tile cut without stress, and it will amaze you how soon everything happens.
Step 3: Spread the Adhesive
after you have successfully dry-fit your terrazzo tiles, the next step is to spread a thin layer of adhesive (wet-set) on the floor with a square notch trowel. Avoid covering the chalk mark that you have already made with the glue. To better avoid that, it is better to spread the adhesive at the same level with the line rather than over it.
I recommend that you leave the adhesive for some minutes to allow it to become tacky. To get better information on how to use the adhesive properly, read the user manual for specific directions.
Step 4: Lay the first row
Now, it’s time to lay the first row of your terrazzo tiles in full. When you start installing, make sure that you are distant from the wall to avoid tiling yourself to the corner. You can begin with the installation from the middle line for the best result and lay the tiles towards the outside wall.
Remember that your first set of tiles must be complete tiles, and ensure that you put each tile firmly into the right position. Also, but each tile snugly up against the following one to avoid any visible joint.
It is vital to ensure that the tiles are flat, level, and square to the chalk line. You will need a rubber mallet here to tap the tiles gently into the adhesives.
Step 5: Lay the outer lines and continue laying
After setting the first row perfectly, the next thing to do is lay the cut tiles into the outermost row. After you have done this correctly, you can continue the flow and keep laying other rows in a like manner.
Suppose you are laying the terrazzo tiles in the kitchen or utility room. In that case, you have to be sure that you lay the tiles under all the appliances like the refrigerator, dishwasher, or washing machine to prevent the floor from being damaged due to the constant leak.
Step 6: Roll the floor to secure the tiles
When you have finished setting the tiles into the adhesives and notice that the tiles are becoming sticky to their position, it is time to secure them. You can roll the floor with a roller to ensure that the tiles bind well with the adhesives.
Step 7: Apply a Sealer
The final but not the least step is to apply a sealer to the tiles on the floor. Note that you would have to leave the tiles for about 12 hours to dry before you can walk on them and apply a sealer.
Now, the kind of sealer you use can make or mar the entire work. To be safe, I suggest that you buy a sealer that can work perfectly for terrazzo tiles in particular. You can speak with the attendant of the store where you purchased the tiles for a good guide.
You don’t have to pay a pro for your tiling works. Instead, you can do it yourself and save money on other essential parts of the renovation project. Meanwhile, you might not have done anything like tiling before; it is not a problem. If you can follow the above instructions step by step, you will lay t=your terrazzo tiles like a pro.